Tuning a series LCR circuit.

• Systems that tend to oscillate at a natural frequency respond strongly when driven near it, like a swing pushed in time with its own motion. This is resonance.
• In a series LCR circuit, XL = ωL grows and XC = 1/ωC shrinks as ω rises. At one frequency ω₀ they are equal, Z falls to its least value R, and the current amplitude reaches its greatest value vm/R.
• Setting ω₀L = 1/ω₀C gives the resonant frequency ω₀ = 1/√(LC).
• NCERT's graph uses L = 1.00 mH, C = 1.00 nF and vm = 100 V, so ω₀ = 1.00 × 10⁶ rad/s. With R = 100 Ω the peak current at resonance is twice what it is with R = 200 Ω, since im = vm/R there.
• At resonance the voltages across L and C are equal and opposite and cancel; the whole source voltage appears across R. Resonance therefore needs both L and C: an RL or RC circuit cannot resonate.
• Radio and TV tuning uses resonance. The aerial picks up many stations at once; turning the tuning capacitor moves the circuit's resonant frequency onto one station's frequency, so that station's current is the largest.
• Example 7.10: an airport metal detector is a many-turn coil with a capacitor, tuned to resonance. Metal carried through the coil changes the impedance, the current changes noticeably, and the change sets off the alarm.

Teaching this idea? Put the simulation on your own page or LMS with this code.